Features
Fast Response
Accurate and stable monitoring
Ultra-low sample flow rate
Linear output voltage
End-tidal peak or continuous readings
Measures respiratory rate
For mice, rats, and larger animals
Specifications
Carbon dioxide measurement: single beam, non-dispersive infrared
Measurement range: 0 - 9.9% (0 - 76.0mmHg) CO2
Accuracy: 0.15% (1.1mmHg)
Resolution (internal and analog output): 0.01% (0.1mmHg)
Resolution (display): 0.1% (1.0mmHg)
Linearity: 0.1% CO2
Repeatability: 0.1% CO2
Response time (T10 - T90): 75mS at 70 ml/min through cell
Sample cell materials: sapphire and stainless steel
Analog output scaling: 1.1V/% (0-10V)
Response time (T10 - T90): 150mS at 50 ml/min sampling
Zero stability: 0.2% (8 hours), 0.3% (24 hours)
Interference effects: 50% N2O: 0.1% at 0% CO2, 0.6% at 5% CO2 (uncomp.)
Maximum sample cell pressure: +5 psig
Interference effects: vaporized anaesthetic agents: negligible
Operating temperature range: 5-40° C
Optical bench temperature: 48° C, controlled
Warm-up time: 4 min to 0.2%, 10 min to 0.1%
ETCO2 trend display: 5 minute graphical scrolling display
Sample flow (sample inlet - carrier flow out): 10ml/min nominal, adjustable from 5.0 - 20ml/min
Sample tubing connections (carrier flow, sample inlet): Luer female
Calibration controls: Zero, Span
ETCO2 alarm adjustment range: 1.0 - 9.9% (8 - 75mmHg)
Respiratory rate measurement range: 5 - 200 breaths/min
Signal outputs (rear panel): BNC jacks
CO2 output scaling: 1.0V / %CO2
Respiratory rate output scaling: 0.05V / bpm
Alarm output: 5V if alarm condition, 0V if no alarm
Serial data output format: 2400 baud, 8 data, no parity, 1 stop bit
Electrical requirements: 120VAC/220VAC switchable, 35VA
Dimensions: 19W x 5.25H x 16D in., 49W x 13H x 41D cm
Weight: 10 lbs. (4.5kg)